EU Packaging Regulation PPWR Now Applies: What Companies Need to Know

Karton kutu, bez kese ve cam vazoda okaliptüs dalıyla sürdürülebilir ambalaj kompozisyonu

The European Union’s Packaging and Packaging Waste Regulation (PPWR), formally Regulation (EU) 2025/40, entered into force on 11 February 2025 and has applied across the EU since 12 August 2026. It replaces the Packaging Directive 94/62/EC, in place since 1994. Unlike the Directive, the PPWR applies directly in every Member State without having to be transposed into national law.

The PPWR affects not only packaging manufacturers but every company that places packaged products on the EU market, including exporters from outside the EU. In this article, drawing on the European Chemicals Agency’s (ECHA) PPWR guidance and European Commission sources, we summarise the obligations that already apply and the key dates for the years ahead.

What Does the PPWR Aim to Do and Who Is Covered?

The Regulation covers the whole life cycle of packaging: design, material and substance content, labelling, re-use, collection and recycling. Its goal is to replace diverging national rules with a single framework for the internal market and to reduce packaging waste. According to the European Commission, without action EU packaging waste was projected to grow by 19% by 2030, and plastic packaging waste by up to 46%.

Obligations apply to packaging manufacturers, producers and importers placing packaged products on the market, distributors and companies selling at a distance to consumers in the EU. In addition to sales packaging, grouped, transport and e-commerce packaging are also within scope.

Obligations Applying Since 12 August 2026

PFAS Limits in Food-Contact Packaging

The following limits apply to per- and polyfluoroalkyl substances (PFAS) in food-contact packaging. They cover both intentionally added and unintentionally present PFAS and refer to the concentration in the packaging, not to migration into food:

  • 25 ppb (µg/kg) for any individual PFAS measured by targeted analysis – polymeric PFAS excluded,
  • 250 ppb for the sum of PFAS measured by targeted analysis – polymeric PFAS excluded,
  • 50 ppm (mg/kg) for total PFAS, including polymeric PFAS.

Packaging first placed on the EU market after 12 August 2026 must meet these limits; products already placed on the market before that date may remain. As there is not yet a harmonised EU analytical method, laboratories typically start with a total fluorine screening and move on to targeted PFAS analysis where needed. Takeaway containers, fast-food wrappers, microwave popcorn bags, bakery paper and pizza boxes are among the products most affected.

For the broader REACH restriction process on PFAS, see our article on the ECHA RAC opinion on the PFAS restriction proposal.

Heavy Metals Limit

The sum of the concentrations of lead, cadmium, mercury and hexavalent chromium in packaging or packaging components must not exceed 100 mg/kg.

Minimising Substances of Concern and ECHA’s Role

Article 5 of the PPWR requires packaging to be manufactured so that the presence and concentration of substances of concern (SoCs) are minimised. The concept covers substances of very high concern (SVHCs) on the REACH Candidate List, substances in certain hazard classes under CLP, and substances that negatively affect the re-use or recycling of packaging.

ECHA plays a key role here. Starting from a screening of around 6,000 substances, the Agency drew up a draft list of around 700 candidate substances and collected information from stakeholders on their use in packaging between 16 July and 24 August 2026. The European Commission, assisted by ECHA, is to prepare its report on substances of concern in packaging by 31 December 2026. This report may pave the way for further restrictions under REACH.

Being on the candidate list does not in itself create new obligations, but companies whose packaging contains such substances should already start collecting information from their supply chain. Our REACH SVHC and Candidate List service can help with this.

Technical Documentation and EU Declaration of Conformity

Packaging manufacturers must draw up technical documentation demonstrating compliance with the PPWR requirements and issue an EU declaration of conformity. Since 12 August 2026, the manufacturer must also be identified on the packaging or in its accompanying documents. In addition, under extended producer responsibility (EPR), producers placing packaged products on the market must be registered in the national producer register of each Member State where they sell; for products from manufacturers outside the EU, this obligation generally falls on the importer in that country or on an appointed authorised representative.

Key Dates for the Years Ahead

DateWhat changes?
12 February 2028Tea and coffee bags, single-serve tea/coffee units and sticky labels on fruit and vegetables must be compostable.
12 August 2028A harmonised, pictogram-based sorting label showing material composition becomes mandatory (or 24 months after the relevant implementing act, whichever is later).
2029Member States must achieve 90% separate collection of single-use plastic beverage bottles and metal beverage cans of up to 3 litres, with deposit return systems being set up for this purpose. Labelling rules for reusable packaging start to apply.
1 January 2030All packaging must be recyclable; minimum recycled content in plastic packaging; a maximum empty space ratio of 50% for grouped, transport and e-commerce packaging; bans on certain single-use plastic packaging formats (e.g. for fresh fruit and vegetables under 1.5 kg); first re-use targets.
2035Packaging must be recyclable at scale.
1 January 2040Higher recycled content and re-use targets.

Recycled Content Targets for Plastic Packaging

Packaging type20302040
Contact-sensitive PET packaging (excluding single-use beverage bottles)30%50%
Contact-sensitive plastic packaging other than PET10%25%
Single-use plastic beverage bottles30%65%
Other plastic packaging35%65%

On re-use, the 2030 targets are 10% for beverage packaging and 40% for transport packaging, including e-commerce; certain product groups are exempt.

What Does This Mean for Exporters to the EU?

Although the PPWR is an EU regulation, its impact reaches well beyond the EU’s borders. Manufacturers exporting to the EU – including companies in Türkiye – must be able to document PPWR compliance both for the packaging of their products and for any packaging materials they supply to EU customers. EU buyers are already increasingly asking their suppliers for declarations and test reports on PFAS, heavy metals and substances of concern.

Steps to Take Now

  1. Map your packaging: List all components, including materials, coatings, inks, adhesives and labels.
  2. Verify the PFAS status of food-contact packaging: Collect supplier declarations and, where needed, commission total fluorine screening and targeted PFAS analysis.
  3. Check the heavy metals limit: Document that the sum of lead, cadmium, mercury and hexavalent chromium is below 100 mg/kg.
  4. Screen for substances of concern: Compare components against the REACH Candidate List and CLP classifications, and follow ECHA’s work.
  5. Prepare your technical file and EU declaration of conformity.
  6. Get ready for 2030: Start planning for recyclable design, recycled content and packaging minimisation now.

How Doruksistem Can Help

Doruksistem supports companies throughout PPWR compliance with substance screening of packaging materials, management of testing and analysis, REACH SVHC assessments and sustainability and compliance consulting. To assess the PPWR compliance of your packaging together, get in touch with us.

Sources

This article is for general information only. For obligations specific to your products, please refer to the text of the Regulation and seek expert advice.

Share
Facebook
LinkedIn
Twitter
Email
Print
Doruksistem
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.